Back splice details found in:
Back splice 12 strand rope.
Mark core where it comes out of the cover.
Step 1 tie a slip knot about 5 fid lengths from the end of the rope.
Splicing instruction mega plait tapered.
Use these marks to do a back splice as follows:
Take it over the strand on the right rope, and tuck it under the next strand.
This process makes the material stronger and much less prone to creep or stretch.
By following the procedure below, the splice can retain from 90% to 100% of average new rope strength and in used rope up to the same proportion
Lay your rope and crown knot on your table and, using your fingers or a tool, like a screwdriver or fid, loosen the weave of your rope below the end strand fastener.
Smooth out the rope to bury the end.
Dx cup, dx cup grip,.
12 strand ropes from samson, yale, new england and all gear we are pleased to carry the finest 12 strand ropes from samson, new england, yale, and all line splicing services.
Tuck the tapered tail into the tool and pull it through the rope.
An eye is formed into the rope and the tail is buried into the standing part.
Splicing instruction mega braid to chain splice.
Splicing instruction end for end tuck splice.
The key to using this simple splice is to make sure that you use a lock stitch.
Finishing the back splice download article 1 loosen the weave of your rope.
Measure back 1 short fid section from the end and mark the cover.